Coordinates
The latitude and longitude appear directly beneath the water's name. Tap the copy icon to copy the coordinates for GPS navigation, mapping, and other planning tools.

Follow the original map instructions in their intended order. Every map example is taken from the actual Superhatch interface, including the original attribution.
Understand what the colored pins represent before exploring a river.
Tip Tap any colored pin to open details about that location and its planning links.
Click a large pin to open detailed information about that water.
Scroll inside the pop-up to see stream details, links, hatches, access notes, and fishing conditions.
Use the map controls to zoom, search, measure distance, and change base layers.
Use full-screen mode for better viewing.
Three simple classifications describe the frequency and importance of surface hatch activity.
Limited or inconsistent surface hatches.
Good hatch activity, but usually timing-specific or section-specific.
Strong hatch-driven water where insect activity can bring trout consistently to the surface.
The hub for stream information, planning links, coordinates, and safety notes.

Tap or click any fishing pin to open its information window. Each pop-up provides location coordinates, useful planning tools, and available information about the selected trout water.
The latitude and longitude appear directly beneath the water's name. Tap the copy icon to copy the coordinates for GPS navigation, mapping, and other planning tools.
Opens the selected pin's location in Google Maps for geographic reference, nearby roads, access planning, and navigation.
Opens Windy.com for weather forecasts, radar, wind, and other conditions near the selected location.
Provides access to nearby USGS streamflow monitoring information, including river discharge, water levels, and water temperature where available. Monitoring stations may not be located directly on the selected water.
Uses the selected pin as the center of a 100-mile search radius to evaluate nearby trout waters for potential hatch activity, rising trout, and dry-fly fishing opportunities.
Opens iOverlander to help locate nearby camping and overnight options. Use the displayed coordinates to refine your search.
Each pop-up includes a reminder to verify access, fishing regulations, and current conditions before visiting. Some pins identify potential access points rather than confirmed public access. A link to the full Superhatch Map terms is also provided.
Scroll down within the pop-up to explore additional fishing information. Larger trout-water pins may include Superhatch Level, water type, stream size, trout species, water descriptions, productive hatch locations, access notes, fishing conditions, and seasonal hatch charts.
Close the pop-up by clicking the X in the upper-right corner or anywhere on the map.
Boundary lines are useful references—not legal access confirmations.

Boundaries are shown where available and are for general reference only. Always verify public access, private property, regulations, and current land status locally before entering an area.
Enable the GPS location icon to compare your position with nearby boundaries.
Identify marked locations, but never assume a map label grants public access.

Some river pools, access areas, parking areas, trailheads, and landmarks are labeled on the map. Unnamed water points may display as Trout Water. This does not mean they are necessarily access points. Click any pin to open its pop-up for coordinates and planning links, including Google Maps, weather, streamflow, the Interactive AI Hatch Finder, and camping.
Access, parking, trail, and land-use conditions can change. Map locations may be approximate, outdated, or may not reflect current access restrictions, property boundaries, closures, or legal status. Always verify current conditions and legal access before visiting.
Two complementary backgrounds help you study roads, trails, terrain, and water.
OpenStreetMap is useful for viewing roads, trails, and access areas. USGS Topo shows terrain, elevation contours, and topographic features. Use the Layers button to switch between the two backgrounds.
Follow your location, pause automatic map tracking, and read the directional pointer.
Tap the GPS button once to turn on GPS, center the map on your current location, and automatically follow your movement. The blue circle shows your location, while its pointed tip indicates the direction the top of your phone faces. Hold your phone with its top pointing forward to see the direction you're facing.
When driving, the pointer uses GPS direction of travel, even when your phone is mounted horizontally. The pointer also maintains a steady direction during brief stops to prevent sudden changes.
Tap the GPS button again while the map is following you to turn GPS off.
Drag the map to explore nearby areas. GPS remains on, and your location continues updating, but the map stops automatically following your movement. Tap the GPS button once to recenter your location and resume following. Tap it again while following to turn GPS off.
Tip: tap either GPS screenshot to open it over the guide. Use the zoom control in the viewer to read the small pop-up labels.
Allow location access when prompted. The pointer uses compass and GPS information to determine direction. If direction information is unreliable, only the blue location circle may appear. Location and direction accuracy can vary depending on your device, surroundings, and GPS or compass signal quality.
Use parking and trailhead pins alongside mapped paths to plan possible approaches.

Magenta pins indicate parking areas and trailheads.
On the OSM Base Layer, trails are often shown as thin red or dashed lines. Use them to identify possible hike-in routes from nearby roads and access areas to verify. Always verify public access, closures, and trail conditions before hiking in.
Start at a map pin to explore trout-water opportunities within 100 miles.

Choose any pin on the map to use as the center of the 100-mile search radius.
The Interactive AI Hatch Finder uses that location to evaluate trout waters within the search radius for hatch activity, rising trout, and dry-fly fishing. It compares streamflow, weather, seasonal hatch timing, and recent fishing conditions, then recommends up to three waters with suggested fishing sections, expected hatches, best dry-fly windows, approximate locations, and navigation links. You can also ask about flies, access, camping, alternate waters, or changing conditions.
The Interactive AI Hatch Finder opens in ChatGPT with the prompt automatically filled in. Send the prompt to generate your results. You may be asked to sign in to ChatGPT.
For more detailed Hatch Finder results, use a higher thinking-effort setting if your ChatGPT account offers one. Otherwise, send the prompt normally.
Estimate stream lengths and walking routes before you head out.

Use the ruler icon to measure distances in yards or miles.
Useful for estimating hike-in routes, walking distances, and the length of stream sections.
Locate the river you want without manually scanning the entire map.

Use the search tool to find a water. Type the water name and a list of the waters with their state will display.
If multiple results appear, choose the result closest to the area you want to view.
Orange lines help identify mapped upstream and downstream regulation boundaries.

Special regulation sections are identified by orange lines marking their upstream and downstream boundaries. Click or hover over a highlighted line to view regulation details.
Always verify current fishing regulations with the appropriate fish and wildlife agency before fishing.
Take the same Superhatch Map from desktop to phone or tablet.

The Superhatch Map works on computers, tablets, and phones using the same URL.
Quick access to the map without repeatedly typing the website address.
Visit chasingthehatch.com.
On Android, use Chrome. Tap ⋮ → Install and create shortcut → Create shortcut. Choose Create shortcut, not Install.
On iPhone or iPad, use Chrome. Tap Share → Add to Home Screen → Add.
Tap the Share icon.
Choose Add to Home Screen.
Chasing the HatchAddTap Add to finish.
Illustrated menu guide for Chrome on iPhone/iPad; buttons may appear in different positions depending on browser and iOS versions. These are instructional illustrations, not device screenshots.
Plan ahead for weak reception or no coverage in remote trout country.
The Superhatch Map requires an internet connection through cellular data, Wi-Fi, or satellite internet.
Remote areas may have limited or no service. Check access, regulations, and directions before leaving reliable coverage.
Satellite internet, such as Starlink Mini, may provide internet access in remote areas where cellular service is weak or unavailable.
If your cellular plan supports hotspot use, you can share your phone's data connection with a tablet or other larger-screen device.
Open the pin coordinates in a familiar map for geographical context.

Click the Google Maps link in a pop-up to open the selected pin in Google Maps.
Location reference, nearby roads, access areas to verify, parking areas, trailheads, and nearby stream locations.
Google Maps is a third-party navigation service and may not reflect current road access, private property boundaries, seasonal closures, parking restrictions, or field conditions. Always verify access and conditions before traveling, and do not interact with the map or device while driving.
The Superhatch Map is for fly-fishing planning only. Information and pins may be approximate or outdated and do not establish legal access. Some locations may require landowner permission. Verify regulations, land status, boundaries, access, parking, road and trail closures, current conditions, and wading safety. Use the map at your own risk.